Regina Forklift Training Schools

Regina Forklift Training Schools - Know How To Utilize A Forklift Properly With Our Forklift Training Schools

Are you searching for work as a forklift driver? Our regulatory-compliant mobile equipment operator training provides instruction in kinds of forklifts, pre-shift check, fuel types and handling of fuels, and safe utilization of a forklift. Practical, hands-on training helps participants in obtaining fundamental operational skills. Program content comprises existing regulations governing the use of forklifts. Our proven forklift Schools are intended to provide training on these types of trucks: powered pallet truck, narrow isle forklift and counterbalanced forklift.

While the lift truck is in operation, do not lower or raise the forks. Loads must not extend above the backrest. This is due to the possibility of the load sliding back towards the operator. Check for overhead obstacles and make sure there is adequate clearance before raising a load. Stay away from overhead power lines. When the load is raised straight up, tilt it slightly back.

While the load is lifted the forklift would be less stable. Make certain that no pedestrians cross beneath the elevated fork. The operator must never leave the lift truck when the load is raised.

The forks should be level when handling pallets, and high enough to extend all the way into and underneath the load. The width of the forks must provide equal weight distribution.

Chock the wheels and set the brakes before unloading and loading the truck. The floors must be strong enough to support the weight of both the load and the forklift. Fixed jacks can be installed in order to support a semi-trailer which is not coupled to a tractor. The height of the entrance door must clear the forklift height by a minimum of 5 cm. Edges of rail cars, ramps and docks should be marked and avoid them.

Click to Download the pdf