Regina Boom Lift License - To be able to operate an aerial boom lift, operators must be licensed through training that can be obtained utilizing both classroom sessions and practical training and by attaining a boom lift license. Instruction must be given with respect to the type of aerial lift that would be utilized on the job. A License is needed for anybody who operates or works on an aerial boom lift.
Vehicle-mounted aerial devices consist of the following work vehicles: aerial ladders, extensible boom platforms, articulating boom platforms, vertical towers, and any combination of these kinds.
There are several basic safety regulations that apply to all boom lifts. Worker safety whilst in the basket is a top priority. Workers must put on a body harness and lanyard attached to the basket or boom. Never tie off to an adjacent pole, structure, or equipment. Workers should stand on the floor of the basket, and never sit or climb on the edge of the basket. The load limitations of the manufacturer should be adhered to.
Aerial lift operators must be authorized to utilize the machines. The operator has to know all the aspects of the device and must have access to the manufacturers guidebook which should be kept inside the lift. Operators are responsible for making certain that safety procedures are followed in operating the lift. A daily test of lift controls must be done. Set brakes and position outriggers (if they are utilized) on a stable surface or on pads. When working on a slope, make use of wheel chocks.
Never move an aerial lift truck with an elevated boom whilst personnel are within the basket. Articulating boom and extensible boom platforms used as personnel carriers should have plainly marked, accessible, upper controls. Except in emergency cases, lower controls must not be utilized to override upper controls unless the person inside the lift gives consent.
While working from an aerial lift, do not wear pole or tree climbers.
Do not alter the insulated portion of the aerial lift.
Do inspect the booms to ensure it is properly cradled and the outriggers are in the stowed position before moving.
When operating a boom lift next to power lines, make certain that the lines are di-electrically tested based on local rules.